Namecheap.com - Cheap domain name registration, renewal and transfers - Free SSL Certificates - Web Hosting
CapsMod Forum


 
Subject: EVGA nForce 680i SLI - sample for testers
-HoNY-
Newbie
Rank: 1



UID 65
Digest Posts 0
Credits 2
Posts 1
Reading Access 10
Registered 3-1-2007
Location Brno, Czech Republic
Status Offline
Post at 7-13-2008 05:37  Profile | P.M.  | ICQ Status
EVGA nForce 680i SLI - sample for testers

This is ES for testers. EVGA use only qulity caps on this revision of board.
  • Nippon Chemi-Con SMG, KMQ, LXZ
  • Rubycon MCZ, YXG
  • Samxon GC, GF
  • Sanyo OS-CON SEPC



Top
trodas (trodas)
Administrator
Rank: 9Rank: 9Rank: 9Rank: 9Rank: 9Rank: 9Rank: 9Rank: 9Rank: 9


UID 10
Digest Posts 0
Credits 503
Posts 442
Reading Access 200
Registered 12-8-2006
Location Czech republic
Status Offline
Post at 7-13-2008 06:05  Profile | Site | Blog | P.M.  | ICQ Status
A bit skew soldered these Samxon GF, but many GC near rams and so on... Amazingly good looking mobo, thanks!




"It is dangerous to be right in matters on which the established authorities are wrong." - Voltaire
...just keep folding, just keep folding... :) my config
Top
Fizzycapola
Newbie
Rank: 1



UID 290
Digest Posts 0
Credits 9
Posts 9
Reading Access 10
Registered 12-23-2007
Status Offline
Post at 8-13-2008 15:37  Profile | P.M. 
One of the questions that goes through my head often. What board to buy. This one looks good, if a bit crowded, custom heatsink modding to keep the board under 50oC (my personal if some say irrational preference) may worry me. It's so important that a board is built to last. Especially in these times where technology isn't advancing much more than superficially, increasing inefficiency demanding more power to achieve yesterdays tasks, I still use a laptop for most PC tasks as it has alot of oscon parts, I feel it's more reliable atm my last 3 PC builds haven't even worked at all and cost innumerate financial loss ( I can only blame supernatural curses for this - it defies probability / logic)

Good job. I will consider this board when undertaking my next build.




☞Electrostatic resistance is futile.
Top
trodas (trodas)
Administrator
Rank: 9Rank: 9Rank: 9Rank: 9Rank: 9Rank: 9Rank: 9Rank: 9Rank: 9


UID 10
Digest Posts 0
Credits 503
Posts 442
Reading Access 200
Registered 12-8-2006
Location Czech republic
Status Offline
Post at 8-14-2008 06:16  Profile | Site | Blog | P.M.  | ICQ Status
Well, bad news for you, Fizzycapola. I bet this board is not mentioned for sale. It is just a testing board - the store edition might (and I bet it will) differ by used components.

When I considered a board last time for Opteron 939, I picked up an relatively unknown one - Sapphire A9RX480 "Grouper". Why? Because they send out samples of it to reviewers with Teapo caps and for many times, these boards died in their hands, during testing...!

So they used quality Nichicon caps for the main production and the board working for me well ever since. And reliably and highly overclocked.
I replaced the Vcore caps and Vdimm caps with Samxon GA caps, tough.




"It is dangerous to be right in matters on which the established authorities are wrong." - Voltaire
...just keep folding, just keep folding... :) my config
Top
 


All times are GMT+8, the time now is 9-11-2010 07:05

    本论坛支付平台由支付宝提供
携手打造安全诚信的交易社区 Powered by Discuz! 5.0.0  © 2001-2006 Comsenz Inc.
Processed in 0.020539 second(s), 9 queries , Gzip enabled

Clear Cookies - Contact Us - CapsMod - Archiver