BUFFALO WYR-G54 - Capacitors Modification - CapsMod Forum

Member

UID 5
Digest Posts 0
Credits 430
Posts 184
Reading Access 10
Registered 11-28-2006
Status Offline

Post at 10-25-2009 01:13 Profile | P.M.

BUFFALO WYR-G54

my friend gave it to me and said it wouldn't work anymore

it is a lot hotter than mine one, so i think this is the reason it comes with a full metal chassis (and tiny heat sink on the chips)

Attachment: Your usergroup does not have permission to access attachments

Member

UID 5
Digest Posts 0
Credits 430
Posts 184
Reading Access 10
Registered 11-28-2006
Status Offline

Post at 10-25-2009 01:14 Profile | P.M.

just take a look on it, i find that 3 x 25v 450uF are going to blow out

Attachment: Your usergroup does not have permission to access attachments

Member

UID 5
Digest Posts 0
Credits 430
Posts 184
Reading Access 10
Registered 11-28-2006
Status Offline

Post at 10-25-2009 01:15 Profile | P.M.

so i tell my friend to help me save its life (recapping)

my friend seems run out of samxon cap, and he changed them to nichicon 16v 680uF

Attachment: Your usergroup does not have permission to access attachments

Member

UID 5
Digest Posts 0
Credits 430
Posts 184
Reading Access 10
Registered 11-28-2006
Status Offline

Post at 10-25-2009 01:16 Profile | P.M.

it works again finally

and i change the rubber standing feet due to the original one is aging

Attachment: Your usergroup does not have permission to access attachments